How to Glue a Puzzle Together

After you’ve worked for hours or days on a complex, beautiful puzzle, what next? Do you admire it for a moment and then take it apart? Consider gluing your puzzle together instead, to preserve your great work.

Materials needed:
Your completed puzzle.
A large piece of cardboard to use as a work surface.
Glue (Mod Podge and rubber cement work well. Hobby stores also sell special puzzle glue).
A foam brush.

First, you will need to very slowly and carefully slip the cardboard under your puzzle. Working from one end, carefully lift an edge of your puzzle, slip the edge of the cardboard underneath, and release the puzzle edge on top. Slowly inch the cardboard down the length of the puzzle. *Tip: Assembling your puzzle on top of the cardboard would eliminate this step.

Next, use your sponge brush to spread your glue over the top of your puzzle. Cover a few sections at a time, ensuring that you have complete coverage and a thin coat. Continue until the entire surface is covered, cleaning any stray drops as they occur.

Allow this coat to completely dry, and then repeat. After the second coat is dry, you should feel as though you can tug on the puzzle and not feel it will pull apart.

At this point, very carefully turn the puzzle over on its face and repeat the gluing process. Again, apply two coats, allowing each to dry thoroughly. If you like, you may add as many coats equally to both sides as you’d like until you are satisfied that the puzzle is secure.

When the final coat is dry, you have completed the task of gluing your puzzle together! Now you can tack up your beautiful project on the wall, display it on a desk, attach it to a piece of wood or even frame it so that you and your loved ones can enjoy it for ever.

One thought on “How to Glue a Puzzle Together

  1. Judy miller

    March 3, 2015 2:33

    I broke up a puzzle in 3-5 pieces and glued the backside usind rubber cement. This way larger pieces are easier to assemble in nursing homes. Yet the backs remain tacky several days later even when using a fan. I don’t think I used this product when last doing this several years ago.. Any suggestions?!

Write your comment Here